Open Hole
Packer
Frac
Sleeves
Frac
Plugs
Compact Full Composite Frac Plug
Composite Frac Plug provides a means to isolate multiple zones during high pressure stimulation frac operations. The plug accepts a ball which can be dropped from surface or ran in place, the plug allows for fluid to flow from above to below until the ball seats giving isolation from above. The operator can pressure up against the frac plug to isolates lowers stages, Due to the composite material the plug can be easily milled and circulated back to surface.
F1 Dissolvable Frac Plug
The GW frac plug is a high-performance dissolving frac plug designed to withstand frac pressures of 10,000 psi at over 300F in todays demanding frac applications. The GW offers extreme pump in rates at over 20 BPM along with large bore for flow back. This fully dissolving plug helps eliminate the risk associated with drillable plugs and is available in our standard dissolve rate alloys and Xcel dissolve alloys. The GW allows you to meet the needs of your well regardless of fluid conditions. to allow the dissolve rate to be tailored for different Environments.
The GW plug allows you to get to depth rapidly, set reliably and frac at pressure all while you allowing to dissolve on time.
Composite Bridge Frac Plug
Composite Frac Plug provides a means to isolate multiple zones during high pressure stimulation frac operations or temporary well abandonment. This device can be run as a Bridge Plug or a Frac Plug with a ball which can be dropped from surface or ran in place, the plug allows for fluid to flow from above to below until the ball seats giving isolation from above. The operator can pressure up against the frac plug to isolates lowers stages, Due to the composite material the plug can be easily milled and circulated back to surface.
Drop Ball Frac Sleeve
The Ball-Open Frac Valve is actuated by a corresponding ball to seat combination. Once a ball is dropped and pumped down onto a seat, hydraulic differential pressure causes the inner sleeve to shift down into the open position, Communication with the annulus is now established and the breakdown of the formation creates a flow path which allows the fracturing treatment of that zone to begin. Each zone led into the well bore is incrementally progressive from the toe to the heel.
Immediate Open Toe Sleeve
The Immediate Open Hole Toe Valve eliminates the need for Tubing Conveyed Perforating (TCP) Toe Prep by providing a simple and reliable hydraulically actuated injection path. The Immediate Open Toe Valve can be pressure tested multiple times below the activation pressure.
Multi Test Toe Sleeve
The Multi Test Toe Valve eliminates the need for Tubing Conveyed Perforating (TCP) Toe Prep by providing a simple and reliable hydraulically actuated injection path. The Multi Test Toe Valve allows the Toe Valve to be opened without exceeding the desired test pressure and unlimited hold period. The Multi Test Toe Valve can also be pressure tested multiple times below the activation pressure.
Open Hole Swell Packer
The Swell Packer is a downhole device used in Cemented and Un-Cemented Multi-Stage Liner Completions for Zonal Isolation. The Packer uses Specifically Formulated Elastomer to suit the Well Conditions to Swell in Water or Oil Based Fluids. A Seal is then created inside the open hole, typically straddling Ball Activated Frac Sleeve and Isolating the Open Hole Interval for Selective Fracturing.
Hydro Mechanical Open Hole Packer
The Open Hole Packer is a downhole device used in Multi-Stage fracturing operations for zonal isolation. This hydraulic set packer is specifically designed to set and seal in the open hole straddling a ball open frac. sleeve, isolating the open hole intervals into fracturing stages. The Open Hole Packer is equipped with an internal locking mechanism which ensures a positive and reliable long term set.